Limits current and helps set voltages. Many through-hole types use coloured bands; surface-mount types often use printed codes.
Start with what you can see
Appearance is a clue, not a guarantee. Packages vary between manufacturers, so read markings and verify unfamiliar parts.
A light-emitting diode. It is polarised and normally needs a current-limiting resistor in a simple indicator circuit.
Stores electrical energy. Common aluminium electrolytic types are polarised; the sleeve stripe usually marks the negative lead.
Allows conventional current more readily in one direction. The body band on many axial diodes marks the cathode.
A three-terminal adjustable resistor. The centre terminal is the wiper; it can act as a variable divider.
Can act as an electronic switch or amplifier. Identify the exact part number and pinout before wiring; pin order is not universal.
Read the value before you use it
Resistor colour bands encode significant digits, a multiplier and tolerance.
Four-band resistor
Band 1 is the first digit, band 2 the second digit, band 3 the multiplier, and band 4 the tolerance.
Example: Brown · Black · Red · Gold = 10 × 100 Ω = 1,000 Ω (1 kΩ), with ±5% tolerance.
Five-band resistor
Band 1, 2 and 3 are the significant digits, band 4 is the multiplier, and band 5 is the tolerance.
Example: Brown · Black · Black · Brown · Brown = 100 × 10 Ω = 1,000 Ω (1 kΩ), with ±1% tolerance.
The tolerance is not an extra resistance value. A 1 kΩ resistor with ±5% tolerance may measure between 950 Ω and 1,050 Ω and still be within specification.
What happens when polarity is reversed?
Explore a simplified low-voltage LED circuit. Change the connection and observe the model.
This model only illustrates polarity. It does not calculate current, forward voltage, resistor heating or device damage. Always include a suitable series resistor and check the LED datasheet when designing a real circuit.
Recognise the marked terminal
Use the manufacturer's datasheet when markings or package conventions are unclear.
LED and ordinary diode
- LED long lead is commonly the anode (+) on a new through-hole part.
- Short lead is commonly the cathode (−).
- A flat edge on many LED packages marks the cathode side.
- The stripe on many axial rectifier diodes marks the cathode.
Electrolytic capacitor
- The stripe on many aluminium electrolytic capacitors marks the negative terminal.
- On many radial parts, the longer lead is positive, but do not rely on lead length alone.
- Observe voltage and polarity ratings. Reversed or over-voltage operation can cause venting or rupture.
- Discharge capacitors safely before handling or measuring a circuit.
| Component | Common polarity clue | Important caution |
|---|---|---|
| LED | Long lead anode; flat edge often cathode | Confirm package; use a series resistor |
| Axial diode | Body band usually cathode | Check part number and datasheet |
| Aluminium electrolytic | Sleeve stripe usually negative | Observe voltage and polarity rating |
| Transistor | No universal visual pin order | Look up exact part pinout |
Component and polarity challenge
Try these questions before moving to the workbench.
Which marking commonly identifies the cathode on an axial diode?
Choose an answer.
Where would you like to go next?
Preview the topic before you move on. You can also return to the module directory at any time.
Free to learn. More support when you need it.
Continue with open lessons and tools. For personalised explanations, project troubleshooting, guided practical training or masterclasses, EazyLife offers paid support tailored to your goals.
Free or sponsored lesson referrals may be available through active programmes; they are not guaranteed.