Choose an experiment
Each station is a small simulation. Change a control and watch what happens.
Build an LED circuit
Discover how voltage, resistance and current work together.
The resistor limits the current flowing through the LED. Lower resistance allows more current to flow.
Model note: simplified LED with a constant 2.0 V forward drop. Real LEDs have current and thermal limits.Control a DC motor
Use PWM to change the average power delivered to a motor.
PWM switches power rapidly on and off. At 60% duty cycle, the signal is on for 60% of each cycle, producing an average voltage of 7.2 V from a 12 V supply.
Model note: speed is estimated as proportional to average voltage. Real motors also depend on load, torque, friction and driver losses.Measure distance with sound
See how an ultrasonic sensor measures the time taken by an echo.
Ready to measure. Send an ultrasonic pulse.
Distance = (echo time × speed of sound) ÷ 2. The division by two accounts for the sound travelling to the object and back again.
Model note: assumes a sound speed of 343 m/s at approximately 20°C and a clean echo.Visit each station to complete your first lab session.
Quick engineering challenge
A 5 V supply powers a red LED with a 2 V forward drop. Which resistor gives approximately 10 mA of current?
One question · Instant feedback